Your Page Title

Tutorial by Irene

A very special thank you to Kaz for helping me with this translation

This tutorial is copyrighted and may be linked to only. It may not be copied, uploaded to your server, or sent in any form via e-mail, etc. You may save it to your own hard drive or print out for your personal use ONLY. The graphics you create from these tutorials are yours for personal use. No profits are to be made what so ever from this tutorial.

You will need:

Eye Candy 4000

My selections, download them here. I have added the two tiles I will be using in the zip as well.

Let's get started! *S*

1. Open a new image 502x365 transparent. Add a new layer call it foot1. Selections>Load from disk>1fot1.sel. Flood fill with #9B703D. Selections>Modify>Contract by 1. Then flood fill with #DAB484. Selections>Select all, Selections Float. Then Effects>3D effects>Cutout with these settings and shadowcolour #72502C.

Deselect. Effects>Noise>Add 4% uniform. Then Effects>Plug in filters Eye Candy 4000>jiggle with these settings:

2. Add a new layer, call it foot2. Selections>Load from disk 2fot2.sel. Repeat exactly the same for this foot.

3. Add a new layer, call it pants. Selections>Load from disk 3bukse.sel. Floodfill with the pantstile that was added in the zip. Selections>Float then give it the same cutout as in step1, but change the blur to 35 and the shadowcolour to #282F44.

4. Add a new layer, call it shadow.Selections> Load from disk 4bukseskygge.sel. Flood fill with #161A24. Deselect.

5. Add a new layer, call it tail. Selections>Load from disk>5hale.sel. Flood fill with #9B703D. Selections>Modify>Contract by 1. Then flood fill with #DAB484. Selections>Select all, Selections Float. Then Effects>3D effects>Cutout with the same settings as in step 1, but change the blur to 15. Deselect. Then Effects>Noise>Add 4% uniform. Effects>Plug in filters Eye Candy 4000>jiggle Same settings as in step 1.

6. Add a new layer, call it left hand. Selections>Load from disk>6vhand.sel. Flood fill with #9B703D. Selections>Modify>Contract by 1. Then flood fill with #DAB484. Selections>Select all, Selections Float. Then Effects>3D effects>Cutout with the same settings as in step 1, but change the blur to 20. Deselect. Then Effects>Noise>Add 4% uniform. Effects>Plug in filters Eye Candy 4000>jiggle Same settings as in step 1.

7. Add a new layer call it jumper. Selections>Load from disk>7genser.sel Flood fill with the darkpink tile that was added in the zip. scale 50(This is not the same tile as I have used in the top picture.) Selections>Float then give it the same cutout as in step1, but change the blur to 60 and the shadowcolour to #763436. Deselect.

8. Add a new layer, call it book1. Selections>Load from disk>8bok1.sel. Flood fill with any colour you like. I have used #B20404 Deselect. Effects>Noise>Add 4% uniform.

9. Add a new layer call it book2. Selections>Load from disk>9bok2.sel. Flood fill with black. Deselect.

10. Add a new layer, call it book3. Selections>Load from disk>10bok3.sel. Flood fill with white. Then Selections>Float. Then give it the same cutout as in step 1 but change blur to 25 and shadowcolour to #C0C0C0. Deselect. Effects>Noise>Add 4% uniform.

11.Add a new layer, call it book4. Selections>Load from disk>11bok4.sel. Flood fill with #C0C0C0. Deselect. Effects>Blur>Gaussian Blur with radius 0,5

12. Add a new layer, call it book5. Selections>Load from disk>12bok5.sel. Flood fill with white. Then Selections>Float. Then give it the same cutout as in step 1 but change blur to 10 and shadowcolour to #C0C0C0. Deselect. Effects>Noise>Add 4% uniform.

13. Add a new layer, call it book6. Selections>Load from disk>13bok6.sel. Flood fill with white. Then Selections>Float. Then give it the same cutout as in step 1 but change blur to 10 and shadowcolour to #C0C0C0. Deselect. Effects>Noise>Add 4% uniform.

14. Add a new layer, call it left arm. Selections>Load from disk>14venstrearm.sel Flood fill with the tile you used for the jumper scale 50. Selections>Float then give it the same cutout as in step1, but change the blur to 18 and the shadowcolour to #763436. Deselect.

15. Add a new layer, call it right hand. Selections>Load from disk>15hhand.sel. Flood fill with #9B703D. Selections>Modify>Contract by 1. Then flood fill with #DAB484. Selections>Select all, Selections Float. Then Effects>3D effects>Cutout with the same settings as in step 1, but change the blur to 24. Deselect. Then Effects>Noise>Add 4% uniform. Effects>Plug in filters Eye Candy 4000>jiggle Same settings as in step 1.

16. Add a new layer, call it right arm. Selections>Load from disk>16h-arm.sel Flood fill with the tile you used for the jumper scale 50. Selections>Float then give it the same cutout as in step1, but change the blur to 24 and the shadowcolour to #763436. Deselect.

17. Add a new layer, call it ears. Selections>Load from disk>17ører.sel. Flood fill with #9B703D. Selections>Modify>Contract by 1. Then flood fill with #DAB484. Selections>Select all, Selections Float. Then Effects>3D effects>Cutout with the same settings as in step 1, but change the blur to 25. Deselect. Then Effects>Noise>Add 4% uniform. Effects>Plug in filters Eye Candy 4000>jiggle Same settings as in step 1.

18. Add a new layer, call it innerears. Selections>Load from disk>18innerøre.sel. Flood fill with #9B703D. Selections>Modify>Contract by 1. Then flood fill with #DAB484. Selections>Select all, Selections Float. Then Effects>3D effects>Cutout with the same settings as in step 1, but change the blur to 15. Deselect. Then Effects>Noise>Add 4% uniform. Effects>Plug in filters Eye Candy 4000>jiggle Same settings as in step 1. Then last on this layer, Colours>Adjust>Brightness/Contrast. Set Brightness to 50 and Contrast to 0.

19. Add a new layer call it head. Selections>Load from disk>19hode.sel. Flood fill with #9B703D. Selections>Modify>Contract by 1. Then flood fill with #DAB484. Selections>Select all, Selections Float. Then Effects>3D effects>Cutout with the same settings as in step 1, but change the blur to 50. Deselect. Then Effects>Noise>Add 4% uniform. Effects>Plug in filters Eye Candy 4000>jiggle Same settings as in step 1.

20. Add a new layer, call it details. Selections>Load from disk>20markering.sel Flood fill with #72502C Deselect.

21. Add a new layer, call it muzzle. Selections>Load from disk>21mule.sel. Flood fill with #9B703D. Selections>Modify>Contract by 1. Then flood fill with #DAB484. Selections>Select all, Selections Float. Then Effects>3D effects>Cutout with the same settings as in step 1, but change the blur to 22. Deselect. Then Effects>Noise>Add 4% uniform. Effects>Plug in filters Eye Candy 4000>jiggle Same settings as in step 1. Then last on this layer, Colours>Adjust>Brightness/Contrast. Set Brightness to 50 and Contrast to 0.

22. Add a new layer, call it mouth. Selections>Load from disk>22munn.sel Flood fill with black. Deselect.

23. Add a new layer, call it nose. Selections>Load from disk>23nese.sel. Flood fill with black. Then Effects>3D effects>Inner Bevel use the preset settings for "Round" Deselect.

24. Add a new layer, call it cheeks. Selections>Load from disk>24kinn.sel. Flood fill with #B42A2A. Deselect.

25. Add a new layer, call it highlights. Selections>Load from disk>25highlight.sel. Flood fill with white. Deselect.

26. Add a new layer call it eyes1. Selections>Load from disk>26øyne1.sel Flood fill with white. Deselect. On the same layer Selections>Load from disk>27 øyne2 Flood fill with black, while still selected Then Effects>3D effects>Inner Bevel use the preset settings for "Round" but change Depth to 9 and angle to 117. Deselect.

27. Add a new layer call it eyes2. Selections>Load from disk>28øyne1.sel Flood fill with #DAB484. Then Selections>Float and give it the same cutout, as we have used all along, but change the blur to 5. Deselect. Effects>Noise>Add 4% uniform.

This is how your bear should look like now

Now you little bear is done, all you have to do is to add some pictures or writing to the pages of the book. It is up to you! Hope you have enjoyed this tutorial!

If you shold have any questions, just mail me and ask.

Back to tutorialindex